Detroit Diesel Diagnostic Link (DDDL 8.20 ) Professional 2024 -ALL Grayed Parameters Enabled ! ALL Level 10 !!

Package Include :

DDDL v8.20 is for 2007 & newer engines (DDEC VI & newer)
DDDL v6.5 is for 2006 & older engines.

Detroit Diesel Diagnostic Link (DDDL) 8.20 Professional \Engineering version- can be used on DDEC VI and newer systems:

 • View information about the connected ECUs;
 • Perform standard fault code operations;
 • Perform traditional and advanced troubleshooting;
 • Read variable values in real time and display them graphically;
 • Configure and manage parameters;
 • Perform service routines;
 • Play back logs of all connected activity;
 • Program the CPC/MCM (EPA07) and CPC02T/MCM2/ACM2 (EPA10)

ECUs Supported:
EPA07 – DD15, DD13, DD16, S60, MBE900, MBE4000
EPA10 – DD13, DD15, DD16
GHG14 – DD13, DD15, DD16, DT12 Transmission
Freightliner Cascadia
Western Star 5700XE


DiagnosticLink 8.0x Features:
Vehicle ECU software compatibility checking
Vehicle ECU Instrumentation and I/O control troubleshooting panels
Vehicle ECU Identification and Fault Code display
Display detected equipment in a user interface
New I/O control view reduces the number of tabs shown
The new display of Program Device settings
New VIM Throttle Panel for testing GHG14

(DDDL 8.20) Engineering Level Special Features : 

  ALL MCM and CPC Programming Is Enabled !

- No external programs needed.
- Everything works very fast.
- DDL 6.5 Activate
- MBE Activate
- DRS Activate

New Service Routines :
- ABS - Valve Activation (NGC)
- Accumulated Fuel Mass Sync (MY17)
- Detroit Diesel Clutch Control (MY13)
- Detroit Assurance Radar Alignment (Stationary)
- Detroit Assurance Radar Alignment (Stationary)(NGC)
- Detroit Transmission Dyno Mode (NGC)
- DTNA Production MPC1 Calibration (NGC)
- DTNA Production MPC1 Calibration with Target (NGC)
- DTNA Production Progressive Shift Enable
- DTNA Production Progressive Shift Enable (NGC)
- DTNA Production Reset Fault Memory Manager (MY13)
- DTNA SCR ADS Self Check (MY13)
- EGR Erase Bank Current (MDEG)
- EGR Hysteresis Measurement
- EGR Lambda Sensor Replacement (MY16)
- EGR Valve Position Control
- EGR Valve Replacement (MY16)
- Engine Idle Shutdown (NGC)
- ESC Learn Procedure
- Fuel System Integrity Check (MY17)
- Fuel System Integrity Check (NGC)
- HC Doser (NGC)
- HVAC Front Stepper Motor Calibration (NGC)
- HVAC Rear Stepper Motor Calibration (NGC)
- Quantity Control Valve Reset FMU (MDEG)
- Radar Alignment (EOL)
- Rating (NGC)
- Set CPC Odometer (NGC)
- Set ICUC Odometer (NGC)
- TCM Clutch Overload Monitoring
- VCP (MDEG)
- Voltages (MDEG)
- Voltages SCR DPF (MDEG)

New Instruments 
- Air Leak check (NGC)
- Antilock Braking System (NGC)
- Auto Traction Control Electronic Stability (NGC)
- Cruise Control (NGC)
- Data Stream (J1939)
- Detroit Assurance (NGC)
- Engine Brake (MDEG)
- Engine Brake (NGC)
- Hill Start Aid (NGC)
- Lane Departure Warning (NGC)
- M2C2 Smart Switch Configuration
- P3 Cruise Control v54
- Switches (NGC)
- Transmission (NGC)

New InputOutputControl
- Door Locks Windows (NGC)
- Electric Horn (NGC)
- Entrance Lighting (NGC)
- Mirror Heat and Adjustment (NGC)

New Parameters Panel
- Initialize CTP (NGC)

- Can Import Export Parameters
- Can Import Export Accumulators
- Can Access Freightliner ReferenceLinks
- Can Access Service ProLink
- Can Register DRS
- Can Register DDL
- Can Register MBE
- Can Roll Call And Monitor
- Can Troubleshoot VehicleFaults
- Can Export Panel Logic
- Can Display Busload
- Can Override Panel Preconditions
- Can Filter View By AccessLevel
- Can Reprogram Edex Units
- Can Reprogram Depot Units
- Can Override Configuration By Part Number
- Can Access Data Mining Information
- Can Set Data Mining Tag
- Can List By Message
- Can Manipulate Device Responses
- Can Extract Selection To Log File
- Can Select Parameter Export AccessLevel
- Can View Separated Preset Settings
- Can View Instrument UpdateRate
- Can Reset Fault Memory Manager
- Can Override Save Upload Content

release covers the support for:

• New Cascadia Vehicle SOP Launch(includes support for power train ECUs and support for most of the vehicle ECUs)

• Support for GHG17 Medium Duty (MD) production software release:

• MCM21T - M9.1.2.3

• ACM21T - E9.57.0.0

• CPC04T - R36_00_000a



Support for GHG17 Heavy Duty (HD) production software release:

• MCM21T - M6.5.0.2

• ACM21T - E7.57.2.0

• CPC04T - R38_00_000a

• CPC302T - R27.53.00 (New Cascadia)

• TCM01T - NAMT117700

• BHM( Bulk Head Module)Programming and Feature/Parameterization client side support

• Basic support for theCTP01T (FOTA) ECU



Features Highlights of Diagnostic Link 8.13

• Implemented over 200 changes (includes enhancement/improvements, bug fixes, features and panel support for the New Cascadia and MY17 ECU Software release);

• Included support for new instrumentation, troubleshooting, service routines, and I/O control panels for the New Cascadia (i.e. CPC302T, SSAM02T, VRDU02T, RDF02T, HVAC, ICUC01T, and MPC01T)in the tool;

• Some of the additional panels include the I/O control panel for Door modules, CGW04T – GVC.

Parameter compare panel, Instrumentation and Service routine basic troubleshooting panels for ABS02T and Parameter tabs for CPC302T;

• BHM programming and feature configuration parameter panels are supported;

• FSIC panels for MDEG and MY17 software versions are supported;

• Help file support for both the New Cascadia and M2/C2 panels are included;

• Panels support for EURO4 EPA07 Retrofit Vehicles;

• Panel to support the CTP VIN Initialization.

* Perform Standard Fault Code Operations;

* Links to Traditional and Advanced Troubleshooting Information;

* Read Actual Values;

* Perform Service Routines;

* Playback Logs of All Connected Activity.

Troubleshooting Guides (English Language): 

• DDC-SVC-MAN-0084: (EPA07/10/GHG14 DDEC VI/10 Electronics and Troubleshooting Manual) - 2020 
• DDC-SVC-MAN-0191: (GHG17 Heavy Duty Troubleshooting Manual) - 2020 
• DDC-SVC-MAN-0193: (GHG17 DD5 Medium Duty Troubleshooting Manual) - 2020 
  
• DDC-SVC-MAN-0184: (EUROIV DDEC VI/10 Electronics and Troubleshooting Manual) - 2020 
  
• DDC-SVC-MAN-0140: (Detroit Transmissions Manual) - 2020 
• DDC-SVC-MAN-0015: (EPA07 MBE 900 DDEC VI Troubleshooting Manual) - 2020 
• DDC-SVC-MAN-0010: (EPA07 MBE 4000 DDEC VI Troubleshooting Manual) - 2020 
• DDC-SVC-MAN-0009: (EPA07 Series 60 DDEC VI Troubleshooting Manual) - 2020 
• DDC-SVC-MAN-0000: (Electrical Wiring Schematics) - 2020 
  New Cascadia Electrical Systems and Troubleshooting Manual - 2020 
• Cascadia Troubleshooting Manual - 2020 

We Are Offering Full Teamviewer Support , We will Connect To your Pc And Install The Software For you !

Product Details :

Region: All regions
Type: Diagnostic software
Language:English,Spanish,French,Italian,Russian,German,Denish,Polish,Finnish,
Dutch,Norwegian,Portuguese,Japanese,Swedish,Turkish,Hungarian,Korea
OS:  Windows 10, Windows 11